Shock Absorbing Landing Gear: This working recreation of the bungee landing gear used on the full-scale Carbon Cub will soak up bumps during ground operations just like the real thing.
All-Wood Construction: Lightweight, laser-cut construction is utilized to bring the Carbon Cub 15cc to life as a durable scale model that’s built to last with a level of rigidity that makes even a friendly flying airplane such as this crisp control response.
Genuine UltraCote Covering: The all-wood structure of the Carbon Cub 15cc is covered with genuine Hangar 9 UltraCote® film that provides a durable and easy-to-maintain finish that closely replicates its full-scale cousin.
Gas or Electric: No matter what type of power you favor—gas/petrol, glow or electric, hardware and mounting options are included to suit a variety of power systems so you can be in the air in less time.
Quick-Connect Wing Struts: The streamlined wing struts feature quick-connect strut pins so that only basic tools are needed at the field.
Functional Flaps: The functional flaps allow you to enjoy the same short-field takeoff and landing performance that full-scale Carbon Cub pilots do.
Landing Lights: The wings feature factory installed wiring and LED lights so that making a working landing light system is easy.
Cockpit Doors: The magnetically secured cockpit door can be left open during flight, just like on the full-scale version. It also lets you keep switches out of sight by mounting them inside the cockpit.
Float Ready: Hard points for mounting the Hangar 9 1/5-scale float kit (HAN6030—sold separately) are already built into the fuselage.
Laser-cut, all-wood construction that’s lightweight
Shock-absorbing main landing gear and tundra-style wheels
Two-piece, plug-in wing with functional flaps
Quick-connect, streamlined wing struts
Functional LED landing lights, installed
Operational cockpit side-doors
Instrument details and seats included
Float ready, with hard points for optional 1/5-scale float set
Matching paint on fiberglass cowl and accessories
Pre-cut hinge locations for all control surfaces
Genuine UltraCote film finish
Tail wire detail and a leaf tail wheel
Easy installation of engine or electric power recommendations
Complete hardware package featuring fiberglass control horns
Wingspan: 90 in (228 cm)
Overall Length: 60 in (153 cm)
Wing Area: 1170 sq in (75.5 sq dm)
Flying Weight: 11.4 lb (5.2 kg)
Engine Size: 15cc 2-stroke gas/petrol
Motor Size: Power 60
Radio: 6+ Channel, full-range transmitter and receiver
Servos: 7 Standard digital servos (6 for electric)
Trim Scheme Colors: Cub Yellow U884, Black U874, Silver U881
CG (center of gravity): 3.0-3.5" (75-85 mm)
Wing Loading: 22.4 oz/ sq in
Prop Size: 16 x 8
Spinner Size: 2.5" (64 mm)
Speed Control : HV 80 AMP
Recommended Battery: 5000mAh 6S 22.2V Li-Po
Control Throw (Ailerons): Low: Up 20mm and down 15mm/ High Up 30mm and down 25mm
Control Throw (Elevator): Low: Up 20mm and down 20mm/ High: Up 25mm and down 25mm
Control Throw (Rudder): 40mm left and right
Scale: 1:5 (20%)
Experience Level: Intermediate
Recommended Environment: Outdoor
Assembly Time: 20+Hours
Is Assembly Required: Yes
Needed To Complete
15cc 2-stroke gas/petrol engine
6+ Channel, full-range transmitter and receiver system
(7) Standard digital servos
(2) Batteries for receiver and engine ignition
Posted in: Toys & Games
Find out how close you are to this item!